Our site is getting a makeover! Please bear with us whilst we make improvements

Make an adjustable bag strap: Free sewing tutorial!

Make an adjustable bag strap: Free sewing tutorial!

I recently found this fab vintage bag in a charity shop but the strap was too short for my liking… I decided to replace the strap so I could wear it cross-body, whilst adding a pop of rainbow at the same time ✂️ So here’s a quick post on how to make an adjustable bag strap!

This is a really easy project – knock one up in less than 30 minutes ⏰

Make your own adjustable bag strap

Knowing how to make an adjustable bag strap is a really useful skill to have in your sewing techniques toolbox… I’ve replaced quite a few of the straps on my daughter’s bags as she’s grown… it’s also a great option if a current bag strap is uncomfortable, or just a bit tatty & worn out.

Replacing the strap can prolong the life of your fave bag, or just give it a new look! You only need a few supplies too!

Scroll down for a written tutorial or catch the vid below…

How to make an adjustable bag strap

A sewing project for: Beginner Friendly

Sewing Time: Under an hour

 

Boring Legal Bit: If you follow any tutorial or guidance found in this post, or on this blog, you agree to be bound by our disclaimer which can be viewed here

Pin For Later!

Make an adjustable bag strap in less than 30 minutes

Need to know:

  • For steps using machine sewing, straight stitch, backstitching at the start & end using stitch length 3mm unless otherwise stated.
  • Read through the instructions fully before starting

Disclaimer: Strangulation hazard: Children must be supervised at all times.

You will need:

Thank you for supporting our online shop with your sewing shopping… It means the world to us & enables us to keep putting out FREE content like this for you to make & create ❤️

We have an amazing selection of bag hardware and notions… check out our full range of bag-making supplies here

Boring Legal Bit: If you follow any tutorial or guidance found in this post, or on this blog, you agree to be bound by our disclaimer which can be viewed here

 

Bag Making Supplies

 

 

  • 2m of your chosen webbing of strapping
  • 2 x swivel clips (also know as dog hooks) that match the width of your webbing or strapping
  • 1 x slider that match the width of your webbing or strapping
  • 2 x D-Rings (optional – if you’re using an existing bag then you are likely already to have D rings already sewn in)

Sewing Equipment You Will Need:

Make a replacement cross-body bag strap

  1. Cut off the original strap

 

Make a replacement bag strap - Step 1 - Cut off the original strap
2. Thread 1 end of your webbing/ strapping through from the underside of the strap slider. Bring the end over the central bar then thread back through to the back

3. Sew the end to secure – a zipper foot can make this easier

4. Thread a swivel clip/ dog hook onto the strap. Hook on the opposite side to sewn hem near the slider

 

Step 4- Make a replacement bag strap - thread a swivel clip onto the strap.

Want to know your #5 from your #3 zip?  Check out our Zip Type Guide

5. Checking the strap isn’t twisted, thread the unsewn end of the strap through the slider

6. Thread the unsewn end through the remaining swivel clip

Make a replacement bag strap - Step 6 - Thread the unsewn end through the remaining swivel clip

7. Sew the strap end down to secure the hook around the final swivel clip

8. Clip and go!

 

 

And you’re finished, well done!

Follow us on Instagram!

How to Enlarge A Collar With A Collar Expander – No Sew! Care & Repair Series #4

How to Enlarge A Collar With A Collar Expander – No Sew! Care & Repair Series #4

 

Welcome to post number 4 in our Care & Repair Series! Today we’re offering a solution to an annoying problem – how to enlarge a collar that is too tight… without any sewing! We’re going to be talking about how to use use a collar expander in this quick product guide.

We wanted to bring these little wonder products to your attention – who knew they were even a thing?!

These nifty little extenders are NO SEW and a great little temporary fix that can even be switched between garments.

With this series of Care & Repair blogs we really want to bring into focus all sorts of different ways in which we can all reuse, repurpose, repair and rejuvenate the clothes that we already own.

A shocking 300,000 tonnes of discarded clothing goes to landfill every year in the UK. according to Wrap, the waste charity, this is up 5% of the UK’s carbon and water footprint. And small things like this can really add up.

Being able to adjust the size of a collar that’s snug can help give a shirt a longer life. These collar expanders can also be used on skirt or trouser waistbands too!

Expanders aren’t permanent fixtures to your garments so they can easily be switched between different shirts – just make sure you take them out before your shirt goes in the wash!

The collar expanders come in a variety of sizes and finishes…. make sure you select the best match for your garment, although it’s unlikely you will see it if you’re wearing a tie, you do need to make sure the collar expander will fit through your garment’s existing buttonhole

These plastic collar extenders will increase the neck size of a shirt by half a collar size and do not stretch.

The other metal extenders do stretch and come in a variety of sizes

How to Enlarge A Collar With A Collar Expander

      1. Choose the collar extender that best matches your garment
    1.  Take the white disc in your fingers and feed the loop through the buttonhole.
    1. Loop the band over the existing button on the collar.
    1. Alternatively you can start by looping the loop around the existing button and then feeding the white disc through the buttonhole.
    1. This is what the collar extenders look like when used correctly.

    6. The larger collar extenders can also be used for waistbands. You need to match the size of the disc on the Expanders as closely as possible to the original button.

    And that’s it! It really couldn’t be more simple, could it?

    Check out Hemline’s video for a demo of the metal variety, which are stretchy, rather than fixed like this one

    Thank you for supporting our online shop with your sewing shopping… It means the world to us & enables us to keep putting out FREE content like this for you to make & create ❤️

    Linking Collar or Waist Expanders Together

    Should you need greater ease at the waistband or collar, the expanders can be looped together to create a larger stretch like this.

    So you can see how easy it is to prolong the life of your garment if it’s become a bit snug.

    Stay tuned for more posts in our Care & Repair series

    Follow Us On Instagram

    How to Repair Bra Hooks: Care & Repair Series #1:

    How to Repair Bra Hooks: Care & Repair Series #1:

    Have you ever wondered if you can repair bra hooks when they get mangled in the wash? Or how you can save a bra that’s perfectly fine, but needs its bra clasp replacing? Keep reading and we’ll give you instructions on how you can quickly & easily complete a bra hook repair.

    In this post you’ll find a full colour tutorial on how you can replace a bra back – it’s really not that tricky either. Yay!

    This is the first post in our new Care & Repair Series…. we hope you find the series useful

    There’s never been a more important time to look after our belongings and Make Do And Mend

    Being able to repair our clothes rather than just replace them is one of the biggest things we can do to contribute to saving our planet right now, and we know so many of our readers are eco-conscience Seam-Stars 💚

    We’ll be publishing a series of helpful Care & Repair tutorials this year which will not only benefit your pocket, but also the planet.

    We’ll be covering topics such as replacing pockets, mending and patching, replacing zips and more!

    But if you’re already a mending whizz and you have some clothes to repair you can check out our really comprehensive care and repair range of products over on the website

    Back to the bras!

    Bras are a garment that every woman owns & wears almost all the time. This means your bras can suffer a great deal of wear and tear. One of the most common things to break over time on a bra are the fastening hooks.

    By repairing your bra hooks on the bras that you already own you can save money AND help reduce waste sent to landfill!

    Read on for info on how to replace your damaged bra hooks rather than have to fork out for another expensive bra!

    Check our full range of Care & Repair products here

    How To Repair Bra Hooks: A Sewing Tutorial
    • Skill level: Beginner
    • Approximate sewing time: It’s a super quick fix!
    Tips To Consider When Replacing Your Bra Clasp
    • Make sure to match your replacement hooks with the original hooks in number and size as best you can
    • Even if only one side of your bra fastening is damaged, make sure you replace both so that the hooks and eyes match up.
    •  The Bra Back replacements come in various different options, 19mm (1 hook), 28mm (2 hooks), 38mm (2 hooks), and 50mm (3 hooks) widths in black, white, and nude. Check out the full range here and select one that matches the bra to be repaired
    • To select the correct size for your bra, measure the width of the current hook and eye parts of your bra and select the width closest to it.
    • It is always best to go a little wider than too narrow, unless it means you will be sewing through a hook or eye.
    • Colour wise, select the colour that best fits the bra. If your bra is a different colour than what is on offer, I suggest selecting the colour which is closest to patterns in the bra, or if it is plain then opt for black if it is a dark colour and white if a pale one

    You Will Need:

    1 Hemline Replacement Bra Back. We used Hemline Bra Back Replacement: 50mm: Nude

    Sewing Equipment You Will Need:

    How to repair bra hooks

    1. 1. Remove the original hooks and eyes on both sides of the bra back.

    1.2. Take the hook portion of the kit and position it on the right side of the bra back (as you look at it).

    • – Fold it around the raw end so that the hooks are on the inside of the back and are laying along the edge.
    • – Pin in place through all layers. If your replacement hook tape is slightly wider than the back of the bra you may wish to hem the edges and turn it through to create a pocket for the bra back instead.
    • – Here, the hooks are slightly narrower than the bra back. I will show you how to rectify this in a moment.
    1. 3. Change the presser foot on your machine to a zipper foot as this will enable you to stitch without the hooks getting in the way of the foot.
      1. – Stitch a line of straight stitch through all layers to hold them in place.
      2. Increase your stitch length to 3-3.5 – don’t worry if the stitches are a little messy.
      3. – You may need to use the point of your embroidery scissors or a Curved Tailors Awl to help feed the fabric through your machine as the bra is so small it may not catch on all of the feed dogs. The fabric seams can also be quite bulky.
      4. – Be careful not to keep your scissors away from the needle!

    Never miss a guide or tutorial

    Click to join our mailing list!

    1. 4. Now the hook part is secure, remove the pin.
    1. 5. Keeping the zipper foot on your machine, select a narrow zig zag stitch. Here, I have changed the stitch width to 2.5mm and stitch length to 0.5mm.
      • – Run a line of zigzag stitching along the line of straight stitch and the edge of the hook tape.
      • – The satin stitch will cover up the straight stitch

    1.6. If the back of your bra is slightly wider han the hook tape as with my bra pictured, push the ends of the bra inside the fold of the hook tape with a needle or stitch ripper.

    • – Use the same zigzag stitch along the edges of the bra back, catching the bra back fabric into the hook tape, and neatening the edges.

    1.7. To replace the eye side of the bra fastening you have a couple of choices, depending on your skill level and how you would like to finish the bra repair.

    • The eye part of the bra fastening comes attached to elastic. If you prefer not to have this elastic you can unpick the zigzag seam holding it as indicated by the point of my scissors in the image below.
    • If you choose to do this you would attach the eye part to the bra in exactly the same way as with the hooks, only with the eyes facing the right side of the left bra back.
    1. 8. You may wish to keep the elastic in. This is a bonus, especially if the original hooks and eyes were damaged due to the bra fitting too tightly.
      • – By using the elastic, you are creating more ease in the bra back for a more comfortable fit and also protecting the new hooks and eyes from resulting in similar damage.
      • – If you are keeping the elastic in you will need to trim it down to the length that you will need. Add 2cm on to your desired length.
    1. 9. Place the left side bra back right side down and lay the raw edge of the elastic over the top, also face down, overlapping by 1cm. Pin in place.
    1. 10. Change your machine presser foot back to your universal foot and stitch a line of straight stitch through all layers to secure the eye elastic to the bra back.

    1.11. Lay the bra back right side facing down and fold the eye piece back on itself, towards the body of the bra.

    • Next fold it back on itself again to the outside of the bra, enclosing the raw edges inside the rolled seam. Pin in place.
    1. 12. Sew a line of stitching down each long edge of the rolled fabric to create a sort of fell seam.
      • – This will be very bulky and challenging to push under the machine foot so you may wish to use the point of your embroidery scissors again, or a Curved Tailors Awl to assist it through, again, being very careful!
    1. 13. Now, fix the hooks and eyes together and your bra repair is complete

    And you’re finished, well done!

    Follow Us On Instagram